The 9 Things Your Parents Taught You About Car Keys Repair > 자유게시판

• 목록
• 답변
• 글쓰기
• 게시판 리스트 옵션
  • 수정
  • 삭제

5 Tips For Car Keys Repairs

Modern car keys are quite complex, and they require expert assistance to fix them when something goes wrong. This article will give you five tips to ensure your car keys are in good condition.

In many instances, key fobs or remote controls can be fixed by simply replacing the battery. In certain cases it is necessary to reprogramme the device. Consult your owner’s manual or an expert for more specific instructions.

Battery Replacement

Many modern cars come with remote key fobs. These include keyless entry and remote starting features. They also include a traditional metal key. These keys are powered with small batteries which eventually run out and require replacement. The procedure is easy and can easily be done by any auto accessory store that stocks the correct battery type for your vehicle model.

Check the owner's manual for your vehicle to determine the kind of battery is in use. Once you know this information, visit your local auto parts store and purchase the replacement. Oftentimes, you can find the same battery at a discount or even for free with a special promotion.

Once you have the new battery in hand you can simply open your key fob, then remove the circuit board by tearing apart two of the seams with a flat-head screwdriver or your fingernail (if you're careful not to force anything). Locate the battery compartment. It will either be inserted, or have a plus/minus sign embossed. Carefully insert the new battery and make sure it's oriented correctly based on the way the previous one was.

Replace the circuit board once the battery is installed. Take the two halves back together. Once it is reassembled, test out the buttons to make sure everything is working as intended. The key's ID fob won't change when the battery is replaced therefore the key fob should not require reprogramming after the repair. This is a great benefit for drivers looking to save money and avoid costly trips to the dealer or locksmith.

Ignition Cylinder Replacement

Modern key ignition systems for cars require an exact sequence of movements before the engine will begin. A damaged key cylinder can stop your car from starting. Although it is possible to replace a key cylinder, it's not a simple process. The ignition is an intricate, one-key system. It requires special tools and precise oiling.

Check if you are able to turn the ignition in the accessory position. Also, check to see if the key fob repairs will fit correctly. This will help diagnose the issue. If you are unable to get the cylinder to rotate in any position it is recommended to look up the owner's manual or consult a professional locksmith to assist you with the ignition repair car remote control key.

If the cylinder rotates in the accessory mode, you can use the screwdriver to push the small anti-rotation switch located at the base of cylinder. Then, you can rotate the cylinder until the slot line and tab are up, then slide it out of its casing. If the cylinder doesn't move at all, or is stuck in a dead end, you may need to gently tap it with an hammer or drill. Be careful as rapping or drilling could damage the steering wheel.

The new ignition engine will be installed after the old one is removed. After that, you'll need to code the new cylinder so it matches the key in terms of sequence and orientation. It is also necessary to take out and examine the tumblers. It is also necessary to replace any tumblers that are worn out.

After the cylinder is replaced, you'll need to attach the dashboard covers and the steering column in the correct order. Attach the dashboard and steering column covers in the correct order. Be careful not to disturb the wiring. It's easy to disconnect or disrupt vital electronic components. Reconnecting the negative battery cable is also crucial. Test your new ignition.

Key Programming

Modern car keys are equipped with a computer chip that communicates with the vehicle. In order for the key to start the engine, the chip and the car need to "know each the other".

A locksmith who has experience in a wide range of cars can reprogram your new car key quickly. They can also assist in the event that your car's lock has become damaged.

Many car locksmiths will inform you that the process could take as little as one minute if the steps are taken in the right order. It can be a bit longer for OBD2 programming or EEPROM programming, since these procedures require a locksmith to remove specific modules from the car (security components) in order to identify the correct passcode and key key data stored. These kinds of procedures are best left to professionals with extensive knowledge of circuit boards and electronics which reduces the chance of corrupting data.

People frequently forget their keys to their car at home, or leave keys in the trunk of their car after loading groceries into the back seat. In these instances you'll often be stranded on the side of the road, without any way to get home or to your destination. If you have a spare car, your locksmith can program it to your car to allow you to return to your car.

The lock could be damaged or the key could stop working because of normal wear and tear. If the teeth of your car keys no longer fit into the lock, you need to think about replacing your key.

Many people attempt to program their own car keys. However, it is recommended to hire a professional instead. It is not uncommon for DIY methods to alter the information on your key, which can cause it to fail, or even, damage your security system. A professional will have a less chance of making an error that could cost you thousands of dollars in the future.

Broken Key Removal

You'll need to remove your broken key from the cylinder of ignition if it breaks. It will be impossible to drive your car until the key is removed, and it's best to call an expert for this task because there is a possibility of damaging the ignition through improper use of lubricants or extraction tools. If you're looking to repair key fob your car keys that have broken at home there are several methods that could aid.

A pair of needle-nosed pliers with extra long tips can be used to grasp the key's end that's stuck in the ignition. You can also enhance your pliers by coating their business ends with an adhesive substance such as super glue, wax that has been melted, or putty. When this is done, the pliers will be able to hold onto the key fragment and pull it straight out of the cylinder.

A thin, stiff wire can be a great tool to slide along a broken car key and removing it from the lock. Paperclips can be used to accomplish this however, bend the ends a bit so that the fragment of the key is held by the larger area.

Mini hacksaw blades are an excellent tool for repairing broken keys, but they need to be extremely small and thin in order to fit into the small opening of an ignition cylinder. These tools can be purchased in hardware stores and the auto parts sections of some large box retailers.

Spraying a small amount of grease into the hole of the key could be a great idea, since it can loosen the car key and make it easier to take it out. Do not attempt to force a damaged car key out as this could cause further damage to the key, and even the ignition. It is risky and difficult to fix a car key that has been bent or split in half. Keep a spare key in a secure location at all times.