20 Myths About Change Door Lock: Dispelled > 자유게시판

• 목록
• 답변
• 글쓰기
• 게시판 리스트 옵션
  • 수정
  • 삭제

Reasons to Change Door Lock

You can alter the lock on your door for a variety of reasons, from increasing the security of your house to redecorating the entryway. You may also need to change locks if your key is stuck in the lock or is difficult to turn.

Even DIY beginners can easily modify their locks. To begin, gather the materials you need.

Remove the old lock

The removal of the old lock from the door is a necessary step before installing the new one. This is especially crucial in the event that you suspect someone else has a key to your home. It is also a good idea if you have moved into a house and experienced a burglary or welcomed a new roommate. It's easier than you think and can be completed in just a few minutes.

Start by removing the screws holding the deadbolt faceplate onto the door frame. To remove the faceplate, you'll need to remove screws on both sides. This will let you see the hidden screws and provide you with an understanding of how to continue with the rest of steps.

After removing the old faceplate, you will have to take off the bolt along with the strike plate and strike plate. Use a screwdriver to loosen the bolt and take it out of the hole in the door. If the bolt is rusty you might need to use a chisel hammer it out. If you are using a chisel, you must be careful not to scratch the door frame.

Before you remove the old lock, make sure that your new deadbolt and doorknob will fit into the existing holes in the door. The majority of hardware stores and big box stores offer different kinds of locks. They can assist you in choosing the best one for your requirements. If the lock you bought is not compatible with your door, send it back and seek assistance.

Find small dents or depressions in the handle and around the trim while you remove the old lock. If you find them, slip a straightened safety pin or flat screwdriver through them to loosen the handle and expose screws underneath.

After removing the screw from the handle, you can begin to remove the knob. To do this, locate the set screw located at the base of knob and loosen it. Then, take the spindle off.

Install the new lock

It's a good idea to change upvc windows locks repair on doors throughout your home periodically, especially in the event of a burglary or you move into a new home with roommates. It is easy, cheap and effective to change the lock on your door. The majority of people can do this themselves with a screwdriver and some basic instructions. You might also want to know how to rekey your door lock to ensure that only you hold the key.

You'll need to buy an additional lock that has the same keyway as the existing lock. You can save money by choosing to rekey the lock yourself. Most locksmiths charge extra to do this. You can purchase a new lock at a hardware store or on the internet. A standard deadbolt will typically be able to fit on doors of all sizes however, you'll have to measure the size of your door to ensure that it fits.

The lock you purchase will usually include a template that shows how to put it on the door. It can be used to guide you when drilling the hole which is much easier than measuring each time. If the template doesn't match your hole, take it back to the shop and purchase a new one.

When you install the new lock, you must be sure to place it on the right side of the door. Examine the latch. It should have a label that says "up" or similar. Make sure that the latch is seated correctly on the latch plate, then secure it using the screws supplied.

When replacing knob locks, you should also be aware of the handing. Most knob locks are left-handed, but there are some that are right-handed. If you're not careful, the knob could be placed on the wrong side of your door, which will make it impossible to lock from the outside or inside.

It is recommended to test the new lock once you have completed. You should be able both to lock and unlock the door with a key from the inside as well as from the outside. If you're not happy with the outcome you can always contact a professional locksmith to fix the issue.

Test the lock

While a door lock that isn't able to be opened can be a nuisance but it could also put your family's safety at risk. It's easy to fix the majority of window door lock repair lock issues by performing some troubleshooting, and lubrication. Check that the key is correctly cut, and that the lock assembly isn't loose or dirty. If this doesn't solve the issue, try applying lubrication to the door lock actuator with powdered graphite or a silicone-based grease.

Make sure that the door lock switch, wiring harnesses and the actuator connector are all working correctly. To check this, refer to the manual or wiring diagram to determine the function and color-coding for all the door lock switch wires. Then, use a test light or digital meter to determine if the door lock actuator receives power and ground when the switches are activated. If you can see voltage switches that toggle with each other, it means the switches are in good condition and the actuator will require replacement.

If the switch appears to be working however the actuator does not move when you turn the knob, it could be an issue with the cylinder itself. The actuator cylinder is fitted with pins that are spring loaded. They prevent the cylinder from rotating until the key is inserted which then pushes them up to match the height of the key at that location. Then, the cylinder to rotate and unlock the lock body, allowing the handle to latch.

If your door lock actuator is faulty, you can remove the switch and wires from the actuator by using a small screwdriver to release the locking bolt and remove the plastic cover that houses the electrical connector. Then disconnect the door lock actuator and let it fall. Then, you should be able identify and remove the two 10mm bolts that hold the actuator in position. Once the actuator has been removed then you can disconnect the black electrical connector.

Replace the key

If your keyed deadbolt or window door lock repair knob isn't working, you will have to rekey it or replace it. It is not difficult to do this yourself and could save you a lot of money. It is best to have an expert locksmith examine the locks for any problems before you start. This will give you peace of assurance that your home is safe and secure.

To begin, take off the faceplate that is on the outside of the doorknob or deadbolt. If there are screws that hold the faceplate in place, use a screwdriver and take it off. Then, take off the interior faceplate by using a screwdriver with a flat head. After removing the faceplate, you can remove the screw and bolt from the lock cylinder.

A locksmith can help you determine if the existing lock needs to be replaced or rekeyed. They can also give you guidance on the most effective security measures for your home. They will also make any necessary modifications to the door and frame to ensure that it is a perfect fit. They also offer an assurance on their work.

If you choose to rekey the lock you'll need to purchase the new key. It is important to use a lock key that fits snugly. A key that's not of the correct size could damage the internal mechanism of a lock and stop it from functioning. Insert the key into the lock to check its size. If it fits flush with the plug, it's the right size. If the pins protrude from the top of plug, then they are too long.

There are a variety of reasons you may want to change your door lock, for example:

Rekeying a upvc window lock repairs can be a cheaper option than replacing it if you are moving into the home of a previous owner or if keys have gone missing. It's also less costly than a full Replacement window lock. Rekeying a lock that is already in use may not be feasible in some circumstances. If the lock has been damaged or repeatedly jammed, for instance it could be the right time to replace it.