Guide To Ghost Immobiliser And Tracker: The Intermediate Guide Towards Ghost Immobiliser And Tracker > 자유게시판

• 목록
• 답변
• 글쓰기
• 게시판 리스트 옵션
  • 수정
  • 삭제

Autowatch Ghost II Immobiliser Review

Autowatch Ghost immobiliser is the next-generation in car security. It is inaccessible to thieves, and it is impossible for them to open the car without a unique pin code.

The system is built on the CAN Data network of your vehicle. It's silent, so it cannot be detected using common radio signals or diagnostic tools. The system does not require any electrical circuit cuts.

What is a ghost immobiliser?

A Ghost Immobiliser is a gadget that protects your vehicle from theft by blocking the engine from starting until you enter a specific pin code. It can be used for various vehicles. And, unlike the standard vehicle immobiliser, it doesn't need a fob or key to operate. It is also difficult to hack or bypass, and it operates in a quiet manner. This means that thieves must be quick to escape without being caught.

It is protected from signal jamming, spoofing and key cloning, all of which that thieves have employed to gain access to cars with standard immobilisers. The device prevents thieves from stealing keys by fishing in your mailbox, or infiltrating your home and stealing the remote control. It will also prevent them from taking away your joy and pride in the event that they are able to get the key, as it prevents them from starting the vehicle until they have entered an initial code.

A Ghost 2 immobiliser immobiliser, in contrast to passive immobilisers, which require a fob or key to be press to activate it and is designed to be completely sealed within the engine. It is directly connected to the CAN data circuit of the vehicle. It makes use of buttons on the steering wheel and centre console as well as door panels to generate an individual pin code that you must enter before the engine can start. The system can be set to an operating mode that allows your car to start and drive for short periods without requiring a PIN code. However, the service mode will be shut down according to speed and time.

It is not possible to hack or bypass the system even with high-tech equipment such as RF scanners or code grabbing devices. It is also impossible to disable using a standard vehicle immobiliser as it doesn't transmit a signal as a standard immobiliser does and only works by connecting directly to the data circuit in CAN.

Because of its technological advancement and ease of installation the ghost immobiliser is now insurance Approved by TASSA (Tracking & Aftermarket Security System Association). We are a proud TASSA approved Ghost installer and can install the device into your vehicle for insurance purposes.

how much is a ghost immobiliser does a ghost immobiliser problems Immobiliser work?

In simple terms, an immobiliser works by preventing your car from starting if the wrong fob or key is used. This is achieved by sending an electronic code to your vehicle's ECU (Engine Control Unit) If this code is sent by the wrong fob or key the ECU will not recognise it and therefore, your car won't start. It is essential to ensure that your car is fitted with an immobiliser by an established and reputable specialist.

At MotorGuard, we are the Midlands leading vehicle security specialists and installers. We offer an Autowatch Ghost immobiliser fitting service for a wide selection of modern cars so you can be at ease knowing that your vehicle is protected against potential thieves.

The Autowatch Ghost immobiliser is one of the first aftermarket CAN bus immobilisers and safeguards your vehicle from key-cloning, hacking and theft. It's designed to remain undetected by thieves because it doesn't use LED indicators or key fobs. It can be concealed within the wiring of your vehicle, so that no additional hardware is needed.

Once installed, it's connected to the CAN system of your vehicle and allows you to create an unique disarming sequence using your PIN code. This code must be entered prior to driving the vehicle. The pin code can be up to 20 presses long, which provides security. If you do not remember your pin code, or if the button has broken there is a secure emergency code that can be used. This will let your vehicle to restart.

It is because the Ghost immobiliser can't be bypassed or hacked that it is such a deterrent to thieves. In addition, it is also TASSA insurance approved (Tracking and Aftermarket Security Systems Association) which could lower the cost of car insurance.

Ghost immobilisers continue to evolve as technology improves. For this reason, we recommend that you contact an Autowatch Ghost immobiliser fitting service immediately to ensure that your pleasure is completely secured. Whether you're buying a new car or want to upgrade your existing car, you can trust us to provide you with high-quality service, so that you can take pleasure in your joy and pride for years to be.

Is the Ghost Immobiliser a good fit for my car?

The ghost immobiliser review is the first aftermarket CAN-bus immobiliser in the world that provides complete protection from modern vehicle theft. It offers protection against key cloning, car hacking as well as ECU swapping. The latest TASSA verified Ghost-II systems also offer vehicle marking and linking to the International Security Register enabling your insurance company to verify that you have a valid Ghost system in place.

Our Ghost immobiliser and Tracker Immobiliser prevents thieves from getting your car started by requiring an unique pin code sequence to be entered or the presence of your smartphone with our Autowatch application before it can be used. It works just as a pin number for bank cards and makes it impossible for thieves to drive off with your joy and pride without entering the correct pin or phone. The Ghost Immobiliser System integrates into the CAN Data Network, so no wire cutting is needed and it works quietly. It is inaccessible to thieves and Ghost Immobiliser and tracker cannot be detected by the sophisticated RF scanning and code grabbing technology that other systems employ.

When the Ghost is fitted by our trained fitters it is completely concealed and inaccessible to the naked eye, it uses the buttons in your vehicle, for instance on the steering wheel, door panels & centre console to create a unique pin code that has to be entered before the engine can start, just as a password on the bank account. Then, it is linked to your smartphone through the Autowatch app, which allows you to go into an indefinite "Service or Valet" mode that deactivates the ghost for up to 30 minutes as you give your vehicle for repair or transport.

It is no surprise that the number of stolen vehicles has risen dramatically. This is due to the high level customization and personalisation that is used in modern cars, as well as the fact that many of us drive older vehicles. Many of these are expensive and scarce vehicles that can take months to repair after being stolen. Hence, making sure that your vehicle's security isn't in danger of becoming the next target is crucial. Ghost immobilisers are a reasonable investment that will keep your vehicle secure and could even help get the vehicle back if it is stolen.

Does a Ghost Immobiliser work on cut principle?

Ghost immobilisers work by blocking the engine of your vehicle from starting until an additional PIN is entered alongside your key fob. This prevents thieves from copying car keys or hacking your car's computer system. It can also make them feel more secure leaving the vehicle unattended.

Once it is installed the ghost immobiliser will generate an unique pincode that ranges from to twenty digits, which you can enter using the buttons on your vehicle (steering wheels, centre consoles, or door panels). This code has to be entered to start your car. The code sequence must be entered each time you drive your car, like a PIN or password on a credit card. This code can be reset easily by entering a series of numbers into the Ghost app on your smartphone.

The Autowatch Ghost II CAN immobiliser also has two deactivation modes for valet and service, that allow you to temporarily start your vehicle without access code similar to keys - while it's in the garage, or with a valet parking service. The immobiliser will reactivate automatically when the car is parked.

The ghost car immobiliser is distinct from other security devices available on the market. It doesn't have any LED indicators, and it operates in a silent manner by utilizing the CAN data network that is in your vehicle. It's also not vulnerable to the same kinds of circuit cut that are common to other security devices, as it does not rely on radio waves.

As a result, it can be placed in a way that is discrete and invisible and therefore is difficult for thieves to locate and detect. It's also not able to be identified by sophisticated scanning tools or code grabbing technologies which are often used to locate and disable security devices.

The Ghost is a premium, state-of-the-art CAN bus immobiliser that provides first-rate protection against key cloning relay theft, and car hacking. It is easy to install and is not detected by thieves. It is not able to be deactivated with simple wire cutting. This makes it an essential for any driver who wants to safeguard their vehicle.