Guide To Ghost Immobiliser And Tracker: The Intermediate Guide For Ghost Immobiliser And Tracker > 자유게시판

• 목록
• 답변
• 글쓰기
• 게시판 리스트 옵션
  • 수정
  • 삭제

Autowatch Ghost II Immobiliser Review

Autowatch Ghost immobiliser is the next-generation in vehicle security. It is unnoticeable to thieves and impossible for them to open the vehicle without a unique pin code.

The system is built on the CAN Data network of your vehicle. It's silent, so it cannot be detected with standard radio signals or diagnostic tools. It doesn't require any cuts in the circuit to be installed.

What is a Ghost Immobiliser?

A Ghost Immobiliser is an instrument that helps to protect your vehicle from theft by preventing the engine from starting until you enter a specific pin code. It is a device that can be used on a variety of vehicles, and unlike other immobilisers, this one does not require a key or fob to operate. It is also very difficult to bypass or hack and works silently, meaning a thief would need to be quick to escape without being caught.

It guards against key blocking, signal jamming and spoofing, all of which are methods that thieves have been using to gain access to cars using standard immobiliser systems. The device prevents thieves from stealing keys by snatching them in your letterbox or infiltrating your home and stealing the remote control. The device will stop thieves from stealing your joy and pride even if they manage to get the key. It stops them from starting it until they enter the code.

A ghost immobiliser, unlike passive immobilisers which require a key or fob to be pressed to activate them, is designed to be completely sealed inside the engine. It connects directly to the data circuit in the CAN of the vehicle. It makes use of buttons on your car's steering wheel and centre console as well as door panels to generate an unique pin code that you must enter before the engine can start. The system can be switched into the service mode, which allows your car to drive and start for short periods of time without needing a PIN code. However the service mode will be shut down according to speed and time.

Because of the technology used, it is unable to be bypassed or hacked, even with the use of advanced technology like RF scanning or code grabbing devices. It is also impossible for a regular immobiliser to be disabled because it doesn't transmit an alert like a standard vehicle immobiliser does, and only operates when connected directly to the CAN circuit.

Due to its advanced technology and easy installation, the ghost immobiliser has been Insurance Approved by TASSA (Tracking & Aftermarket Security System Association). We are a TASSA approved Ghost Installer and can install the device in your car to help you with insurance.

How does the Ghost Immobiliser Work?

Immobilisers stop your car from starting if the wrong remote or key is used. This is accomplished by sending an electronic code to your vehicle's ECU (Engine Control Unit) and if this code is sent from the incorrect fob or key, the ECU will not recognise it, and consequently, your car won't start. This is the reason it's essential to ensure that your car is fitted with an immobiliser installed by an established and trusted specialist.

MotorGuard is the Midlands' most trusted specialist in vehicle security and installer. We offer Autowatch Ghost immobilisers to a variety of modern vehicles. You can be confident that your pride and joy will be protected from potential thieves.

The Autowatch Ghost is the first aftermarket CAN bus immobiliser system in the world. It shields your vehicle from key-cloning, hacking, as well as theft. It's designed to be undetectable by thieves since it doesn't have LED indicators or key fobs. It can be hidden in the wiring of your vehicle so that no additional hardware is required.

Once it is installed the system is connected to the CAN system in your vehicle and allows you to create a unique disarm sequence with your own PIN code which you must enter in order to drive the vehicle. This pin code can be as long as 20 presses long for added security. If you have forgotten your pin code or when the button is damaged there is a secure emergency code that can be used. This will let your vehicle to start over again.

The fact that the Ghost immobiliser can't be manipulated or hacked is what makes it such an effective deterrent against thieves. In addition, it's also TASSA insurance approved (Tracking and Aftermarket Security Systems Association) which can help reduce your car insurance costs.

As technology continues to improve Ghost immobilisers are getting more sophisticated. For this reason, we recommend contacting an Autowatch Ghost immobiliser fitter as soon as possible to ensure your pleasure is completely protected. We can provide you with quality service whether you're buying an entirely new vehicle or upgrading your current vehicle.

Is Ghost Immobiliser compatible my car?

The Ghost is the first aftermarket CAN bus immobiliser the world to offer total protection against modern-day vehicle theft. It provides protection against key cloning, car hacking, as well as ECU swapping. The new TASSA verified Ghost-II systems also provide marking of your vehicle and linking to the International Security Register enabling your insurance company to confirm that you have a legitimate Ghost system in place.

Our Ghost Immobiliser prevents thieves from starting your engine by needing an individual pin code to be entered or the presence of your phone with our Autowatch application installed before it can function. It functions just as a pin number for bank cards and makes it impossible for thieves to steal your car with your joy and pride without entering the correct PIN or phone. The Ghost Immobiliser System integrates into the CAN Data Network, so there is no need for wire cutting and it runs quietly. It is undetectable to thieves and isn't detected by the sophisticated RF scanning and code grabbing technology that other systems employ.

Once the ghost immobiliser reviews is installed by our expert fitters, it's completely hidden and undetectable to the naked eye, it utilizes the buttons on your vehicle, for instance on the steering wheel, door panels, and centre console to create an individual pin code that has to be entered before your engine can begin to run, just like a password for the bank account. This is then linked to your smartphone through the Autowatch app to allow you to switch into an indefinite 'Service or Valet' mode that deactivates the ghost for up to 30 minutes while you give your vehicle for service or transport.

It's not a surprise that the number stolen vehicles has risen dramatically. This is due to the level of personalisation and modifications that are employed in modern vehicles and the fact that a lot of us have older cars. A lot of them are costly and rare vehicles that take a long time to replace after being stolen. Hence, making sure that your pride and joy isn't at risk of becoming the next target is crucial. A Ghost immobiliser is a low-cost of ghost immobiliser investment that will keep your vehicle safe and even be used to recover it if it does become stolen.

Does a ghost immobiliser and Tracker Immobiliser work by cutting principle?

Ghost immobilisers work by blocking the engine of your car from starting unless a second PIN is entered alongside your key fob. This prevents thieves from cloning keys to your car or hacking into the computer system in your car. It can also help them leave the vehicle unattended.

Once installed your ghost immobiliser generates an individual pincode that can be up to twenty digits, which you can enter using the buttons on your vehicle (steering wheels or centre consoles, or door panels). This code must be entered to start your car. The code sequence has to be entered each time you drive your car, just as a PIN or password on credit card. This code can easily be reset by entering a sequence of numbers into the ghost immobiliser for sale app.

The Autowatch Ghost II CAN has two deactivation options for valet and services, which allows you to temporarily start your car without an access code, such as a keyfob - while it is in a garage or parked at valet parking services. The immobiliser will reactivate automatically when your car is in a parking spot.

Unlike other security devices on the market The Ghost is completely undetectable by modern criminals since it doesn't have any LED indicators and works in a silent manner using your vehicle's CAN data network. It is also not susceptible to the same kinds of circuit cuts that are found in other security devices, since it does not use radio waves.

This means that it can be placed in a way that is concealed from view and obscurity and therefore is difficult for thieves to be able to detect. It's also not able to be detected by advanced scanning tools or code-grabbing technology which can often be employed to identify and disable security devices.

The Ghost is a top-quality modern immobiliser for the CAN bus that offers first-rate protection against key cloning car hacking and relay theft. It's easy to install, undetectable by thieves and can't be removed by simple wire cutting. This makes it a must for any driver who wants to secure their vehicle.