Don't Make This Mistake On Your Window Repair > 자유게시판

• 목록
• 답변
• 글쓰기
• 게시판 리스트 옵션
  • 수정
  • 삭제

Window Repairs

Window repairs can save homeowners money and make their homes warm. In the event of serious damages, like broken glass or a damaged frame, a window replacement could be required.

But many other issues can be fixed to prolong the lifespan of your windows. Some common problems include:

Cracked or broken Panes

Whether it's an errant rock being tossed by your lawnmowers, or a tree branch blown by strong winds, cracked window glass isn't just visually unappealing, but also can result in more expensive electricity bills because the broken pieces let cold air into your home. It's fairly simple to repair windows with damaged panes.

Start by carefully removing glass using gloves and sunglasses. You may need use a utility knife to remove old glazing compound or putty around the frame's edges. Then, use a gentle cloth or paper towel to clean the surface of both the glass and the wood of the frame.

Once the area is clean and dry, apply a waterproof silicone caulking to the perimeter of the frame. This will stop water from getting into the frame through the cracks and result in further damage.

If you have double-pane glass, cracks that are severe could damage the gas layer between the panes, making your windows less efficient in insulating. If the crack is severe enough that it is threatening the structural integrity of the window or if the inner pane is missing you might need to consult a professional.

Thermal stress cracks may also occur when there is a significant temperature difference both inside and outside your home. This causes the glass to expand and contract. If this happens on two portions of a window, it's probably best to simply replace the pane rather than trying to repair it.

Clear tape can be used to fill cracks in windows that are not yet ready for replacement. It will also keep out bugs and cold wind. You can cut an area of nylon stocking or tarp that's sufficient to cover the crack, and glue it in place with duct tape. It's not a solution that will last forever, but it works well in a pinch and it keeps cold air and insects away from your home. If you notice cracks on your windows that are older it is recommended to contact the local company to determine if replacing the whole window is the best option.

Rotten Wood

Wood rot is among the most frequent issues with windows. It can damage a home's appearance and create a security danger. It is possible to fix rotted wood. First, you will need to make sure that the root of the rot has been taken care of. Look for leaks on the roof and other places where water could get into the wood.

You will then need to take off the rotten parts of the window frame. This can be done using a rasp, chisel or claw hammer. After the rotten areas have been cleared it is time to replace them with fresh wood. Pre-treated wood is suggested for this project since it is resistant to the onset of rot. If you are not able to replace the wood damaged by rot, you can try using filler or wood hardener to help strengthen the damaged area. This kind of product can be found in a lot of hardware stores. To achieve the best results, make sure you follow the instructions on the product label.

After you have repaired the damaged areas of the window sill, it is crucial to protect the area. Apply a water-resistant sealant the wood. A product such as Sikkens is an excellent option for this task.

Use a two-part epoxy to protect the wood against further damage. This product is easy-to-apply and leaves a beautiful finish. It is crucial to follow the instructions on the label. When the epoxy filler is dry you can sand the wood's surface. It is best to start with a rough grade of sandpaper before moving to a smoother grade.

The last thing you want to do is make the rotted area even worse by exposing it to more water. It is a good idea, that's why you should protect the surface you have repaired with an oil-based primer which will shield it from water. Then, you can reapply the wood sealant that is waterproof.

It won't open

There are a variety of reasons a window repairs won't open. Wood frames can warp during rainy weather, or the house might have sunk or someone might have nailed it shut for security reasons. With a little patience and the right tools, you can open the majority of stuck windows.

The accumulation of gunk or debris could be the main cause of a window not opening. The buildup of dirt and grime on the sliding tracks, hinges and locks over time, notes Acme Glass. In addition, metal hardware is prone to rust when it comes into contact with humidity and direct sunlight. Maintaining these areas lubricated by spray grease can prevent oxidation and keep your window functioning properly.

The pulleys that raise or lower the window could become loose, or break. The components may lose tension and cause obstruction if they are located two or more floors above ground.

If you're having trouble opening the window try using a pry bar to gently push the window to open a bit at each time. Put a piece of wood on the frame to give your pry bar more leverage and be careful not to damage the window or wood. Try using a hairdryer to dry the frame's edges for a few minutes. This will warm the wood, making it easier to move.

A broken spring could be the cause of a window that won't raise or lower. You will need to consult your owner's guide for more details based on the manufacturer of your windows.

If you have tried cleaning the moving parts of your windows and then lubricating them but they're still not opening It could be time to replace them with new, energy-efficient windows from Homespire Windows and Doors. Don't let your windows slip from functional to useless because windows that aren't properly closed can make your home vulnerable to water damage and burglary. Contact us today to learn more about our replacement windows as well as our services!