See What Ghost Immobiliser Problems Tricks The Celebs Are Utilizing > 자유게시판

• 목록
• 답변
• 글쓰기
• 게시판 리스트 옵션
  • 수정
  • 삭제

Protect Your Pride And Joy With The Ghost Immobiliser

Protect your pride & joy against theft with the Ghost Immobiliser. It's discreet and does not require any additional key fobs.

The device uses existing buttons in your vehicle (steering wheel, door panels & centre console) to create a unique pin code sequence of up to 20 presses. This will then allow the start-up of your vehicle.

Simple PIN Code Change Process

Many homeowners are upgrading their security because of the increase in vehicle theft. There are many kinds of aftermarket security devices including tracking systems, alarms and immobilisers. However, not all of these are equally effective in protecting your car. A tracking device can assist you in locating your car if it is stolen however, it won't stop the crime. Immobilisers, in contrast, do exactly what they say on the tin - they shut off your car's engine to prevent it from being started. The Autowatch ghost Immobiliser problems immobiliser is one of the most advanced options available on the market, making it almost impossible for thieves to take your car.

The ghost device makes use of the buttons on your car to generate an unique sequence that needs to be entered to allow the engine to start. This can be done using the indicator stalk, window or heater buttons. There is also a mobile app that can be used as an emergency PIN override, allowing the driver to operate their vehicle without the need to use the button sequence. This is an excellent option for those who want to offer your car to valet parking or for maintenance. The immobiliser will stay in operation.

The Ghost is an unique and innovative device that operates with your vehicle's buttons rather than as a standalone unit. It's not just an effective deterrent to theft of your vehicle however, it can also be used on any future vehicles you own. This makes it a better investment than a traditional wheel lock.

Weatherproof small device

The autowatch ghost 2 immobiliser ghost immobiliser is a high-tech security device that protects your pride and joy against key cloning, hacking & ECU swapping. It is a small weatherproof device that connects with the ECU of your vehicle directly over the CAN bus, causing it to shut down the motor. It can be plugged into the vehicle without the need for additional wiring and has been thoroughly tested to ensure that it works with all vehicles. It is also indestructible to jamming devices which is an approach used frequently by thieves to get around the immobilisers in place.

The benefit of using CAN data is that it operates silently compared to traditional systems. It's not detected by sophisticated RF scanning or code-grabbing technology and is also unrecognizable by conventional diagnostic tools. The Autowatch Ghost doesn't use LED indicators but instead utilizes buttons on your vehicle, like the steering wheel, centre console or door panels, to create a unique disarming sequence. The sequence can be extended 20 presses for additional security. The iPhone app lets you make a single, authorised connection with a pairing code that is unique to the Ghost and communication between the two is encrypted.

The Ghost will stop car thieves from putting in an ignition key that is not in use or replacing the ECU in order to bypass the immobiliser. It will only allow the engine to start when the correct PIN code is entered. It can be temporarily operated in the Valet/Service mode (with the appropriate parameters, like a 30mph speed limit), so you can hand your car to an attendant or valet without needing to enter the code.

Tested for each vehicle

The Autowatch Ghost is a first-of-its-kind aftermarket immobiliser CANbus. It can be connected to the vehicle's wiring and to the engine control unit (ECU). The device intercepts signals to prevent your car from operating normally until you enter a customized code. The system can be activated or deactivated through your smartphone's app without the need for extra wires.

The factory-installed immobilisers function by using a transponder that is integrated into the key. This sends a message to the ECU. The car will start when the correct code is sent. If, however, the transponder of a different vehicle is used instead, the immobiliser won't recognize it. This allows the vehicle to be stolen and started. The Ghost 2 immobiliser immobiliser was developed by a South African company at the top of security systems for vehicles technology. It guards you against key cloning or hacking, and even key theft. The only way thieves could steal your car is by physically towing it away and even then, they wouldn't be able to drive it.

Ghost uses the buttons in your vehicle, including the indicator stalk as well as the steering wheel and door panels to generate a unique PIN code that is changeable that must be entered before you can drive. This is done without additional hardware, like key fobs. It can take up to 20 presses. It is also undetectable by equipment for diagnostics and does transmit radio frequency signals, so thieves cannot make use of sophisticated RF scanners or code-grabbing technologies to identify that an installation has been made.

Unlike physical anti-theft devices like clamps or wheel locks ghost immobiliser tracker is hidden within the vehicle so it can't be taken away or disabled by thieves. It's even more difficult to get rid of than a car alarm, which requires disarming via a button sequence. This makes it a perfect supplement to a GPS tracker which helps locate your car after it's been stolen.

Emergency PIN code override

You don't have to look very long on social media sites to find stories or videos about cars that have been stolen using the latest technology tools. This includes key-cloning devices and hacking tools that allow them to start the vehicle with your original keys.

The Ghost immobiliser has been designed to combat this, and give you an extra layer of security in order to keep your vehicle from being targeted by thieves. It is created by creating a unique pin code sequence that is triggered by the buttons you have on the steering wheel, door panel and the center console. This unique PIN is entered alongside your original key fob in order to stop the engine from starting. The unique override pin can be found on the black card that you will receive following installation. It's easy to remember because there aren't any LEDs.

The device is hidden within the vehicle's wiring and does not emit radio signals, so it can't be recognized by criminals using diagnostic software that can detect the type of security system you have installed. This makes it a great alternative to the tracker.

Contrary to other security systems that rely on a relay located in the engine bays, these immobilisers using CAN communicate via databus (brand dependent) with the ECU and BCM of the car. This enables them to shut down the vehicle completely through the use of a digital block of commands to both the ECU and the engine.

These systems can also be connected to a separate alarm immobiliser or tracker. This must be specified prior to the installation. They are also fully service/valet mode compatible and are a great alternative to a tracker you are taking your car in for an electrical fault at the dealers.

Service/Valet mode

In recent times, there has been an increase in vehicles being stolen without the owners keys. It's now easier than ever before to steal your pride and joy due to the availability of key cloning tools & door lock picks. To stop this, we have launched the Autowatch Ghost immobiliser that prevents your car from being driven despite the fact that your keys were cloned or your vehicle was stolen.

It communicates directly to your car's ECU (Engine Control Unit) via the CAN data circuit. It's completely silent as it doesn't use radio frequency or key fobs. This means that it can't be detected by diagnostics or other vehicle hacking devices. It also stops you from adding a new ECU or key to bypass the system, since only the PIN code allows the engine to start.

The device is hidden in your car and can be reached via the buttons on your steering wheel, the centre console, and door panels. A unique and changeable PIN code sequence that can be as long as 20 digits needs to be entered before you can start your vehicle.

This is the first aftermarket immobiliser CAN bus that has been created that will stop your car from being started or driven away if a PIN code isn't entered before. If you're driving away with the device arming the indicator will flash on your dashboard which will flash continuously for around 300m. Entering your PIN code will turn off the anti-hijack. Your car will continue to run as normal. If you do not enter your PIN at this time the indication will continue to flash and require a new PIN code for every attempt to start your vehicle.