10 Top Books On Subaru Car Keys > 자유게시판

• 목록
• 답변
• 글쓰기
• 게시판 리스트 옵션
  • 수정
  • 삭제

How to Programming a subaru find my keys Key Fob at Home

You might need the key fob to be programmed by an auto locksmith or a Subaru dealer, depending on the age of your subaru impreza key is. This is done by connecting a computer programming machine to your vehicle.

To program your Subaru begin by unlocking the driver's door using the door button control and then close it. You will hear a chime from the instrument panel and the dome lights will flash.

Step 1: Locate the circuit board of your transmitter

There are various ways to program your key fob. First, you must be aware of the type of key fob you own. This can be accomplished by looking at the design of the key fob, or by listening for a buzz in your car.

Once you have these details, you are able to start the process of programming your key fob at home. To accomplish this, you'll require a key made of steel and a flathead screwdriver. Open the key fob by twisting. The key is inserted into the case and let go of the battery by pressing the tabs holding it in place. Replace the battery with a fresh one, and then put the key fob case back together.

Step 2: Remove the key fob case

It is a good idea to replace the batteries in key fobs in case they're not functioning. In some cases the buttons on the key fob can be damaged. If you notice that the contacts made of metal on the button have become loose, try soldering them in place again to make them function again.

Before you start the process, make sure the doors of your vehicle are closed and the ignition is off. You can do this by closing the driver's door and pressing your door button ten times in quick succession. After that, you'll hear the instrument panel chime and your dome lights should flash. This indicates that you're ready to move forward.

Step 3: Put the Key Fob in the Ignition

Many articles on the internet will show you how to get a spare subaru key to program your new or Replacement Subaru Key Subaru keyfob at home. But, the majority of them don't offer specific instructions. Reprogramming an electronic lock is best handled by an expert auto dealer in Fort Bliss or a locksmith.

Sit in the driver’s seat with all doors closed and the engine turned off. Use the door button to unlock all doors. Open and close the door to the driver's side two more times. Then, insert and remove the key from the ignition switch (don't turn it) 10 times in 40 seconds. The system should sound chirps to confirm that the settings have been changed.

Step 4: Turn the Ignition On

Before you begin this process of programming a key fob, it is important to note that this process only works when you have a working key already. If you do not then a dealer or auto locksmith will be required to program a brand new key for your Subaru in Fort Bliss.

After the key is programmed, it should be able to start your vehicle within a matter of five seconds. Begin by closing the doors and then shutting off the engine. Then, sit in your driver's seat, and then unlock all doors with the door button control. Insert the key in the ignition and then turn it to the first position. The electrical systems will be activated however, the engine will remain off. Repeat this process ten times.

Step 5 Step 5: Unlock Driver's Door

Subaru offers a variety of high-end cars with key fobs which lock and unlock doors, start the engine, and even defrost windows. These devices can stop functioning.

To fix this problem to resolve the issue, you should call a locksmith or a dealer. This will solve the issue and ensure your vehicle is safe.

It is necessary to first open and close the door on the driver's side. Then, you need to place the key in the ignition and turn it to the first position. Then, turn it back to the off position. Repeat this ten times in a row as quickly as you can. After the tenth repetition you should hear a sound.

Step 6: Press the Lock/Unlock Button on the Driver's Door

If you are looking to replace the battery inside a Subaru key fob, the process is easy. Remove the fob's exterior case. Then you can use an flathead screwdriver, to pry open the internal case and take out the old battery.

After removing the battery and replacing it with the new one. Close the case. Sit in the driver's seat and open all doors using the door-button control. Place the key in ignition and turn it to ensure that the electrical system is on, however the engine is off. Repeat this 10 times until you hear a chime from the instrument panel. This will enter the system into programming mode.

Step 7: Press the Lock/Unlock Button on the Passenger's Door

For some owners, the annoying chirp heard when locking and unlocking the Subaru key fob from outside the vehicle may be distracting. In some instances the chirp may be canceled by closing and opening all doors and a double-click of the lock button on the key fob.

Switch the ignition off and close all doors, as well as the lid that holds the fuel. For 10 seconds you need to press and hold the lock button on the key fob. The instrument panel emits a chime when this is accomplished. The chirp signals that the lid for the fuel-filler and door are locked. The setting can be altered to ensure that the doors and lids of the fuel-filler lock automatically without having to press a request switch.

Step 8 Step 8: Enter the 8 Digit Transmitter Number

Keep the first 8 digits of the code in your head. Now, get in your driver's chair, close all the doors and turn the ignition to the first position (towards towards). After 10 turns, your instrument panel should sound once.

Then, open the case for the key fob and look for the circuit board of the transmitter inside. There will be one or two sets of numbers (8-digits) on the circuit board. Follow the directions in the guide to register the code. This procedure may require a visit to the dealer for older models.