How To Find Out If You're Prepared To Subaru Car Keys > 자유게시판

• 목록
• 답변
• 글쓰기
• 게시판 리스트 옵션
  • 수정
  • 삭제

How to Programming a Subaru Key Fob at Home

You might need the key fob to be programmed by an auto locksmith or a subaru new key fob cost dealer, depending on the age of your subaru key programming is. This is done by connecting a computer machine to your vehicle.

To program your subaru key cutting unlock the driver's side door using the door button and close it. You will hear a sound on the instrument panel and the dome lights will flash.

Step 1: Locate the circuit board on your transmitter

There are many ways to program your key fob. First, you must determine the kind of key fob you own. You can do this by studying the key fob's shape or by listening to the car for a sound.

Once you've got the information and have it, you can begin the process of programming your keyfob at home. To accomplish this, you'll require a key made of metal and a screwdriver that has a flathead. Open the key fob by twisting. Then push the key made of metal into the case and then release the battery from the small tabs that secure it. Replace the battery and then put the case back together.

Step 2 Step 2: Unscrew the Key Fob Case

It is recommended to replace the battery in key fobs when they're not working. In some cases buttons on the key fob could be damaged. If you can see that the button's contacts made of metal have been damaged then you can try applying solder back to them to make them work again.

Make sure you turn off your ignition and close your doors before you begin. You can do this by closing the driver's door and pressing the door button ten times in rapid succession. You'll then hear the instrument panel chime, and your dome light should flash. This indicates that you are ready to move forward.

Step 3: Insert the fob of your key into the ignition

Many articles on the internet will show you how to program your new or replacement subaru key subaru legacy replacement key cost keyfob at home. But, the majority of them don't offer precise instructions. A professional auto dealer or locksmith in Fort Bliss is the best alternative for reprogramming a digital car key.

Sit in the driver’s seat, with all doors closed and the engine off. You can open the door button control and use it to unlock all doors. Close and open the driver's door two times more. Then insert and remove the key from the ignition switch (don't turn it) 10 times within 40 seconds. The system will chirp to confirm that the settings have been changed.

Step 4: Turn on the ignition

It is crucial to understand that this method of programming a key fob only works if you already have a working key. If not then a dealer or auto locksmith will be required to program a new key for your Subaru in Fort Bliss.

Once your key is programmed you should be able start your car in about five seconds. Begin by closing all doors and turning off the engine. Then, sit in the driver's seat and open all doors with the door button control. Put the key into the ignition and turn it to its first position. The electrical systems will be activated, but the engine will remain in neutral. Repeat this procedure 10 times.

Step 5: Unlock the Driver's Door

Subaru offers a wide range of premium cars equipped with key fobs which can lock and unlock doors and start the car and defrost the windows. However, sometimes, these devices aren't working as they should.

Contact a locksmith or a dealer to resolve the issue. This will solve the issue and ensure that your vehicle is secure.

To do this, you must open the driver's doors and close it. Place the key in the ignition, and then turn it back to position 1. Then, you can turn it back to the off position. Repeat this ten times in one row as fast as possible. After the tenth time, you should hear an audible sound.

Step 6 6. Press the Lock/Unlock Buttom on the Driver's Door

The process of replacing a battery in a Subaru remote key fob is very simple. The fob's case on the outside is opened. Then you can use a flathead screwdriver to push open the interior case and then remove the battery.

After taking out the old battery, replace it with the new one and close the case. Then, sit in the driver's seat and unlock all the doors with the door button control. After that, put the ignition key and turn it so that the electrical systems are turned on but the engine is off. Repeat this 10 times in a row until you hear the chime on the instrument panel. This puts the system in programming mode.

Step 7: Press the Passenger Door Lock/Unlock button.

For certain owners, the irritating chirp heard when locking and unlocking the Subaru key fob from outside the vehicle could become distracting. In some cases the chirp may be canceled by closing and opening the doors as well as a double-click of the lock button on the key fob.

Close all doors including the fuel-filler lid and switch off the ignition. Press and hold the lock side of the key fob's lock button for 10 seconds. The instrument panel emits a chime when this is achieved. The chirp signalizes that the lid of the fuel filler and door are locked. It is possible to change the setting so that doors lock automatically without having to push a switch.

Step 8 Step 8: Enter the 8 Digit Transmitter Number

Note down the initial series of 8-digits, and keep it in a safe place. Now, get into the driver's seat, shut the doors and turn the key into the first position. After ten turns, the instrument panel should start to sound at least once.

Then, you need to open the case for the key fob and locate the circuit board of the transmitter inside. The circuit board should have one or two 8-digit numbers. Note the first number sequence, and follow the steps in this guide to register the code with the system of your vehicle. This procedure may require a visit to the dealer for older models.