Why Subaru Car Keys May Be More Dangerous Than You Thought > 자유게시판

• 목록
• 답변
• 글쓰기
• 게시판 리스트 옵션
  • 수정
  • 삭제

How to Programming a Subaru Key Fob at Home

It is possible that you need the key fob to be programmed by an automotive locksmith or a subaru key copy dealer, depending on the age of your Subaru is. This is done through the connection of a computer programming machine to your car.

To program your spare subaru key begin by opening the driver's side door using the door button control, and then shut it. You will hear a chime and see the dome lights flash on the instrument panel.

Step 1: Find the Transmitter Circuit Board

There are various ways to program your keyfob. First, you must be aware of the type of key fob you own. This can be done by looking at the shape of the key fob, or by listening for a siren in your car.

Once you have the details you need, you can begin the process of programming your keyfob at home. You'll need a flathead and a metal key to complete this. The key fob case can be opened by twisting it. Then push the key in and release the battery from the tiny tabs that hold it in place. replace subaru key the battery with a new one and then put the key fob case back together.

Step 2: Unscrew the Key Fob Case

Changing the battery is a good idea because it can bring back key fobs that have stopped working anymore. However, there are some situations in which the buttons inside the key fob might be broken. If you notice the button's metal contacts have been damaged You can try soldering them back in place to get them working again.

Before you begin the process, ensure your vehicle's doors are closed and the ignition is off. You can accomplish this by closing the driver's side door and pressing your door button ten times in quick intervals. Then, you should hear the instrument panel chime and your dome lights should flash. This indicates that you're in a position to proceed.

Step 3: Insert the fob of your key into the ignition

There are a lot of articles online that give you steps on how to replace lost subaru key to program a replacement key subaru or new Subaru key fob at home, however they are not precise. Programming an electronic key is best handled by a professional auto dealer in Fort Bliss or a locksmith.

Sit in the driver’s seat with all doors closed and the engine off. Open the door button control and use it to unlock all doors. Open and close the driver’s door two times more. Insert and remove the ignition key (don't turn it) 10 times over 40 seconds. The system should sound chirps to confirm that the settings have been changed.

Step 4: Turn the ignition On

It is important to know that this method of programming a key fob only works if you already have a working key. If not an auto-locksmith or a dealer will need to program the key fob for your Subaru Fort Bliss.

Once the key is programmed, it will be able to start your vehicle within five seconds. Begin by closing all doors and turning off the engine. Next, get in the driver's seat and unlock all doors using the door button control. Insert the key in the ignition and turn it to its first position. The electrical systems will be activated however, the engine remains in neutral. Repeat this process 10 times.

Step 5 Step 5: Unlock the Door of the Driver's Door

Subaru has a broad selection of premium cars equipped with key fobs which can lock and unlock doors and start the car and defrost the windows. However, sometimes, these devices fail to function properly.

Call a locksmith dealer to resolve the issue. This will solve the issue and ensure that your vehicle is secure.

To accomplish this, open the door to the driver's side and close it. Then, you need to place the ignition key and change it to the off position. Then, you can return it to the off position. Do this as fast as you can 10 times. After the tenth repetition, you should hear a chime.

Step 6 Step 6: Press the Lock/Unlock button on the Driver's Door

The process of replacing a battery in a Subaru remote key fob is very simple. Unlock the exterior fob case. Then then, use an flathead screwdriver, to pry open the interior case and take out the old battery.

After removing the battery and replacing it with the new one. Close the case. Next, sit in the driver's seat, and unlock all doors by using the door button control. Finally, insert the ignition key and turn it to ensure that the electrical systems are switched on, but the engine is off. Repeat this 10 times until you hear the chime coming from the instrument panel. This will bring the system into programming mode.

Step 7 Step 7: Press the Lock/Unlock button on the Passenger's Door

The annoying chirp which can be heard when locking or unlocking a Subaru Key Fob from the outside of the vehicle can be very distracting for certain owners. In certain situations, the chirp can be turned off by opening and closing all doors and a double click of the lock button on the key fob.

Close all doors including the lid that holds the fuel, and switch off the ignition. For 10 seconds, press and hold the lock button on the key fob. The instrument panel emits a chime when this is done. The chirp indicates that the lid of the fuel filler and door are locked. The setting can also be changed so that the doors and lids of the fuel-filler are locked automatically without pressing the request switch.

Step 8: Enter the 8-Digit Transmission Number

Note down the first series of 8-digits and keep it in your wallet. Now, sit in your driver's chair, close all doors and then turn the key to the first position (towards towards). After ten turns, the instrument panel should start to sound at least once.

Next, open the key fob case and locate the transmitter circuit board inside. There are usually one or two sets of numbers (8-digits) on the circuit board. Follow the instructions in the guide to register the code. For older models, this procedure may require a visit the dealer.