7 Tips To Make The Most Of Your Subaru Car Keys > 자유게시판

• 목록
• 답변
• 글쓰기
• 게시판 리스트 옵션
  • 수정
  • 삭제

How to Programming a Subaru Key Fob at Home

You may need the key fob to be programmed by an automotive locksmith or subaru forester replacement key dealer, depending on the age of your Subaru is. This is done by connecting a computer programming machine to your vehicle.

To program your subaru keys locked in car car, you must open the door to the driver's side using the door button and then close it. You will hear the chime, and see the dome lights flash on the instrument panel.

Step 1: Locate the Transmitter Circuit Board

There are a few different ways to program your key fob. You must first identify the kind of key fob you own. This can be accomplished by examining the shape of the key fob or by listening for a chime in your car.

Once you have these details, you are able to start the process of programming your key fob from home. You will need an flathead and a steel key for this. The key fob can be opened by twisting. The key is inserted into the case and release the battery by pushing the tabs that hold it in place. Replace the battery and put the case back together.

Step 2: Disconnect the key fob case

It is a good idea to replace the batteries in key fobs in case they're not working. In some instances, the buttons on the key fob might be broken. If you see that the metal contacts of the button have come loose Try soldering them into place to allow them to function properly.

Be sure to shut off your ignition and close your doors prior to you begin. You can do this by closing your driver's door and pressing your door button ten times in rapid sequence. Then you'll hear the instrument panel chime and your dome light should flash. This means that you are ready to move on.

Step 3: Insert the key fob into the ignition

There are many articles on the internet that will show instructions on how to program a new or replacement Subaru key fob at home, but most of them are not precise. Reprogramming a key that is electronic is best handled by a professional auto dealer in Fort Bliss or a locksmith.

Sit in the driver’s seat, with all doors closed and the engine off. Use the door button to unlock all the doors. Close and open the driver's door 2 times. Insert and remove the ignition key (don't turn it) 10 times in 40 seconds. The system will chirp when the settings are changed.

Step 4: Turn the Ignition On

Before you begin this process of key fob programming it is important to keep in mind that this process only works if you own one working key already. If you don't an auto-locksmith or a dealer will need to program keys for your subaru legacy replacement key Fort Bliss.

After your key has been programmed and you are able to start your car in around five seconds. To begin, ensure that all doors are shut and the engine is off. Assume a seat in the driver's chair and unlock all the doors using the button for the door. Put the key into the ignition and turn it to its first position. The electrical systems will be activated, however, the engine remains off. Repeat this procedure ten times.

Step 5: Unlock the Driver's Door

Subaru has a broad selection of high-end vehicles with key fobs which can lock and unlock doors, start the car, and defrost the windows. However, sometimes, these devices do not function properly.

Contact a locksmith or a dealer to fix the problem. This will solve the issue and ensure your vehicle is safe.

To accomplish this, you need where to get a subaru key made open the driver's door, then close it. Place the key in ignition and turn it to position 1. Then, turn it back to the off position. Do this as quickly as you can ten times. After the tenth time, you should hear an audible chime.

Step 6: Press the Lock/Unlock Button on the Driver's Door

The procedure to replace the battery inside a Subaru remote key fob is easy. The fob's case on the outside is opened. Then, use the flathead screwdriver open the inside of the case and remove the old battery.

After removing the battery then replace it with a new one. Close the case. Sit in the driver's chair and open all doors using the door-button control. Place the key in ignition and turn the key to ensure that the electrical system is switched on, but the engine is off. Repeat this ten times until you hear the chime from the instrument panel. This will enter the system into programming mode.

Step 7 Step 7: Press the Lock/Unlock Button on the Passenger's Door

The annoying chirp that can be heard when you lock or unlock the Subaru Key Fob from outside of the vehicle can be distracting for certain owners. In certain situations the chirp can be disabled by closing and opening the doors as well as a double-click of the lock button on the key fob.

Switch the ignition off and close all doors and the lid for the fuel-filler. Press and hold the lock side of the key fob's lock button for 10 seconds. The instrument panel emits a chime once this is done. The chime signals that the door and fuel-filler lid are locked. The setting can be changed so that the lids and doors are locked automatically, without pressing the request switch.

Step 8: Enter the 8-Digit Transmission Number

Remember the first 8 digits in your mind. Now, sit in your driver's seat, close all of the doors, and turn the ignition to the first position (towards towards). After 10 turns, your instrument panel should begin to sound once.

The circuit board for transmitters is inside the key fob case. The circuit board should contain one or two 8-digit numbers. Follow the steps in the guide to register the code. For older models, this procedure might require a visit to the dealer.