5 Killer Quora Answers On Wood Burning Fires > 자유게시판

• 목록
• 답변
• 글쓰기
• 게시판 리스트 옵션
  • 수정
  • 삭제

cheap wood burner Burning Fires Need to Be Hot and Clean

Wood burning fires are not only relaxing and captivating They're also an essential aspect of our health and wellbeing. They must be hot and clean in order to be effective.

Green wood, also known as unseasoned wood has an excessive amount of moisture, making it difficult to ignite and burn effectively. Seasoned, or kiln dried wood has a low moisture content and is therefore easier to ignite and keep burning.

Efficient Combustion

The fire in the wood must be sufficiently hot to snuff out moisture and reach temperatures of over 540 deg F. 900 deg F in ideal conditions) where the heat-producing secondary combustion process starts. This is the primary step to efficiently burning the fuel and reducing pollutants smoke, creosote, and buildup in the flue.

It is crucial to remember that the temperature needed for secondary combustion is dependent on the type of fuel used and the environmental conditions. The best way to minimize these variations is by using seasoned firewood with a moisture content below 20 percent.

The amount of air supplied to a fire can also have a significant impact on the temperature and burning time. The greater the oxygen supply, the more hot a fire will burn and the shorter its burn time. If the supply of air is limited, however the wood fire will produce less heat and burn at a lower rate.

To maximize burn time and efficiency to maximize efficiency and burn time, a wood stove fireplace insert should be equipped with an adjustable air damper. A wide-open setting permits the fire to use up all the oxygen available and will quickly use up the fuel that is usable. A fire that is contained in the confines of a small area is less likely to spread.

A load of firewood that has been properly dried is essential for efficient wood burning. Freshly cut freestanding wood burning stove that hasn't been allowed to dry will contain high levels of water which makes it difficult to burn. For the best performance it is recommended you only use seasoned wood that has been stored outdoors for six to nine months.

The BTU content of wood is another factor to take into consideration. White pine and spruce might be cheaper than eastern hardwoods such as shagbark, hickory, and black locust, but their BTU values are greater. This means they'll produce more heat with the same amount of wood. It is important to take into account your heating needs and fuel costs when choosing your firewood.

Clean Burning

Wood smoke can trigger indoor air pollution that can irritate lungs and cause respiratory distress in children and seniors. These pollutants include volatile organic compounds (VOCs) such as formaldehyde and benzene as well as polycyclic aromatic hydrocarbons, such as benzo-a-pyrene, which can cause cancer. Volatile tars (such as creosote) are also released when firewood is burnt.

Smoke from poorly designed wood stoves and fire places could contribute to poor air quality in the outside by making it harder to see and causing photochemical pollution. However, new, clean burning fireplaces and wood stoves equipped with modern technology for combustion, when used correctly, can greatly reduce the emission.

Stage 1 - Moisture vapourizes: As the log heats up it releases water vapor which escapes through the chimney flue. This uses up more energy than it would when the log was dried to dry prior to burning. This is a waste of energy that could be used to heat your home.

These vapors combine in the flue with carbon particles to produce smoke. Smoke is a major contributor to particulate matter in the air and is one of the major sources of smog that we encounter on clear days.

If used properly when used correctly, wood stoves and fireplaces that use clean burn technology can reduce the risk of this issue by burning the logs into a charcoal-like state, which releases less volatile gasses and releases the majority of the energy produced by the log into usable heat.

Avoid using damp, sour or rotten cast iron wood burner to ignite your fire. It's more difficult to burn and produces more creosote. Do not overload your stove with thin and soft woods such as fir or pine. They require more energy to burn and generate more smoke, which could cause chimney fires.

Use a bucket made of steel to scoop ashes from the stove, and wait for them to cool before handling them. Be sure to store or dispose of them correctly as ashes can ignite when exposed to water, and they can be hazardous in landfills. Make use of them in your garden or at home.

Properly properly storing, seasoning and burning your wood properly will save you money on fuel and keep your stove running efficiently. It is also crucial to clean your chimney regularly to remove deposited creosote and other particles as well as to avoid chimney fires and maintain the safety of the operation.

Safety

It's difficult to beat a warm fire on a cold winter night However, security precautions should be taken. When fires are built incorrectly or left unattended, or if they are burned and a dangerous gas can be released into the home. Creosote can also build up in the chimney. These deposits can clog up the chimney and restrict the flow of air, making your wood stove or furnace not to work as efficiently.

Never burn painted or treated wood, household waste, rags, paper and other combustible materials in your wood-burning fireplace or stove. They emit noxious gases and can release toxic fumes, such as carbon monoxide. Avoid using liquids that are flammable as a starter. Gasoline, lighter fluid, and kerosene may cause chimney fires, increase emissions, and create toxic creosote.

Keep combustibles, such as furniture curtains, toys, and other items at a safe distance away from your stove or fireplace. Do not hang clothes on or near your fireplace that is wood burning. Make sure that children understand that the fireplace is hot and should not be touched.

Only use seasoned wood in your fireplace or stove. The wood that is seasoned has been dried during the summer months to decrease the moisture content. Wet woods emit more smoke and creosote, whereas the freestanding wood burning stove that has been seasoned is more efficient and cleaner. Seasoned wood is darker and has cracks along the ends of the grain and makes a hollow sound when you tap it. Keep your logs outside stacked neatly, with the top covered with a breathable air circulate around them.

The appliances that are overloaded generate more smoke, but less warmth. Overloaded fires can also generate unsafe carbon monoxide levels. If you have an older appliance with an insulated metal liner, check the liner on a regular basis for signs of wear and tear that could cause an explosion in the chimney.

The EPA suggests reducing the amount of smoke in your home by using dry, well-seasoned, split and dry wood and building a hot fire with small pieces. Avoid using soft woods such as pine. Pine is a good starter material for an open flame, but should not be used for more than. These woods with resin and sap, which, when burnt, deposits too much creosote in the chimney.

Maintenance

Warming up in front of a fireplace that is wood-burning is a great option to relax during winter evenings. It is crucial to maintain your fireplace in order to make the most of it. Regularly cleaning and inspecting your fireplace is the best way to prevent problems that could arise. This maintenance helps prevent excessive creosote buildup, and also keeps the chimney clean for maximum efficiency.

If the wood doesn't fully burn and creosote builds up in the chimney. When a large amount of creosote builds up, it can lead to chimney fires. These are the second most common cause of house fires across the United States. The failure of a fireplace to burn completely can be caused by a number of causes, including improperly closed dampers and cracks in the chimney's liner as well as a lack of regular cleaning and ash removal.

Incorrectly seasoned wood contributes to the accumulation of creosote to an excessive degree. This is because nearly half the weight of a piece of wood is water. During the fire it boils and releases heat but it also consumes energy in the process. The water vapor produced is then absorbed into creosote or is released into the air as part of smoke.

Another hazard of burning wood is soot. Soot, though less dense than creosote, can impede airflow and stick to walls. It could also pose a fire hazard because it ignites easily when exposed to gasses that are combustible.

Remove the ashes from your fireplace and place them in an ash bucket made of metal. Keep it outside on a non-flammable surface. Don't forget that the remains of the ashes are a good source of nutrients for your plants. Spread them all over your yard!

Regularly have your fireplace and chimney checked by a Regency Dealer Certified. The technician will be able to look for cracks in the chimney, soot and creosote levels, a properly shut damper and also the condition of your catalyst. If you have a two-stage fireplace which has an air tube, the catalyst must be removed and visually inspected for blockages. Check your user manual for directions on how to accomplish this for your particular unit.