See What Ghost 2 Immobiliser Reviews Tricks The Celebs Are Making Use Of > 자유게시판

• 목록
• 답변
• 글쓰기
• 게시판 리스트 옵션
  • 수정
  • 삭제

Ghost 2 Immobiliser Review 2 Immobiliser

Ghost is a wireless system that protects against key-cloning. It connects to the ECU unit via the CAN data network. It is silent and isn't detected by thieves.

You can only disarm it by pressing a button sequence (like PIN code) you have programmed into your car using buttons on the steering wheel as well as the centre console.

Protects Your Car From Theft

Car theft is on the rise, and vehicles are taken away in a matter of seconds. It is essential that car owners take into consideration the extra security measures they can employ. Immobilisers are among the most reliable and well-established ways to keep your vehicle secure. Ghost immobilisers are a good alternative because they are small, hidden within the wires of your vehicle and don't emit radio frequency signals. They are therefore untraceable and can be put in without having an impact on the CAN bus system in your vehicle.

Our ghost immobiliser near you can only be disarmed with the pin code we created at the time of installation. This unique sequence of disarming uses the existing buttons within your vehicle, such as the ones on the steering wheel, doors or centre console to prevent anyone from starting the engine and driving your car stolen with ghost immobiliser away. This makes it impossible for thieves to clone your key or use jamming/spoofing devices that can disable normal immobilisers.

A ghost immobiliser block your vehicle from being driven however it also prevents the car from being taken to make parts. This is a growing problem in the UK due to the growing popularity of these automobiles. It can happen within one minute. TTW's ghost immobilisers can be easily programmed to shield your vehicle from these types of attacks.

When you have our ghost 2 immobiliser installed near me it will prevent your vehicle from being stolen at a service station or even in the event that it is driven by an employee whilst your car is on a lift at the garage. The ghost immobiliser problems can be set to Service/Valet Mode, which allows you, the consumer, to enter a unique button combination.

If you would like to learn more about our ghost immobilisers or need a free quote, please contact us now. We are happy to assist you and provide peace of mind knowing that your vehicle will be protected for all times.

There is no LED or key fob to indicate its whereabouts

Make sure your vehicle is protected from the newest type of car theft with this non-detectable vehicle immobiliser that is incorporated into your cars CAN data network. Ghost is distinct from other aftermarket CAN-immobilisers that rely on LED indicators or key fobs to function. Instead, it utilizes the buttons that are on your vehicle's standard factory controls, including those on the steering wheel and door panels. This creates a code that has to be entered in order to start your vehicle, making it impossible for thieves to locate.

The CAN-BUS device makers have also included extra high-security measures to guard against the device being hacked or by-passed. It also has blocking CANBUS and physical immobiliser cuts, meaning that even the keys are stolen, the thief won't be able to drive off with your joy and pride.

It's simple to install the CAN BUS immobiliser in your vehicle and it only takes about 30 minutes. We will send a member from our team to your location so that they can arrange the time and location that is convenient for your needs. After your vehicle is fitted, you will be given an identification code and security codes to use on your mobile and app. This makes it easier to use and will give you complete control over the safety of your vehicle.

The system is compatible with most modern cars, but should you own a vintage or specialized vehicle we recommend you contact us to check compatibility. The Ghost Immobiliser 2, including installation costs APS449; your car will also be added to the International Security Register if installed by one of our approved installers. Do not be afraid to contact our helpful team with any questions. We're looking forward to hearing from you.

Easy to set up and program.

Modern cars are usually fitted with immobilisers to prevent thieves from hot-wiring or taking your vehicle. Unlike physical deterrents like locking your steering wheel or wheel clamps, an immobiliser is concealed inside your vehicle, making it difficult to locate and defeat.

The system connects directly to the CAN data network in your vehicle and prevents the vehicle from starting unless you input a specific code. The device is small and sealed, which means it can be placed anywhere in your vehicle without additional wiring. It also doesn't emit radio frequency signals, so it cannot be detected by RF scanners or code grabbing equipment that is used by thieves.

ghost immobiliser tracker utilizes your vehicle's current buttons on the steering wheel, door panels and centre console to create a customisable disarm sequence (like a PIN code) which must be entered in order to authorize the startup of your car. The pin code sequence can be modified if needed and is based on four to twenty button presses. You can even put your vehicle in Service/Valet Mode so that it is still operable but will not start or drive. This will ensure that your car is secure when you bring it to the mechanic for valet parking or service and also that the mechanic cannot access your pin code to disable your system.

If you will be away from your vehicle for a long period of time, such as on an excursion or business trip You can use our app for temporary pin. You can also enter your pin code manually when you are planning to drive the vehicle.

Our CAN bus immobiliser may be linked to remote key fobs and tracker (Brand dependent) that will have priority over the ghost system. This is a great option for additional security in the event that your vehicle is stolen or if you lose your keys.

If you're seeking a way to protect your vehicle from key-cloning or hacking, contact us now to find out what is ghost immobiliser we can do to help. We provide our services all over the UK and also in our specially-designed installation center in Derby.

Service/Valet mode

Modern vehicles have sophisticated eco systems, including stop/start systems that require the proper inputs to function properly. For example, battery voltage as well as engine temperatures, external temperatures and which electrical systems are in operation. These can sometimes cause problems and it is difficult to determine if the issue is Ghost-related or not. This is especially true if the vehicle was recently serviced or valet parked. You can use the ghost service mode to permit the vehicle to start and drive for a short period without the need for a pin. This is helpful when your car's being maintained by an independent garage or valet-parked.

To enter service mode, press the service button five times. The indicator light will flash twice to signal that the service mode has been activated. You can leave this mode at any point by entering a PIN number. When you exit the service mode, the Ghost immobiliser is restored to normal operation.

It is a secluded system that communicates with the vehicles ECU on the CAN data circuit, connecting directly to the original vehicle buttons, and not using radio frequency signals like other immobilisers. This makes it nearly impossible for any other device to hack or bypass or jam devices that use spoof codes to mimic the original key fob have no impact on this system.

It is a TASSA-verified anti-theft system that meets the highest protection standards. This includes a unique vehicle marking system linking to the international security register which is a requirement for insurance companies.

The ghost immobiliser is a compact device that is easily hidden in the wiring of your vehicle's factory. This makes it nearly impossible for thieves. The unit that is sealed is so small that it can be placed in various places of the car, including under dashboards or on the steering wheels.

The system makes use of the buttons already present within your vehicle (such as the ones on your steering wheel or door panels, or on your center console) to allow you to make an individual and programmable disarm sequence up to 20 presses in length that must be entered prior to when your vehicle can start. Anyone who has your unique pin code is able to enter it - meaning your family members, your friends or colleagues can utilize it.